Diy Ribbon Chapstick Holder

This is amber from over at crazy little projects happy to be guest posting today at today’s creative life. Clip the corners and turn right side out.

Shop Lip Balm Holders Set of 5 Lip balm holder

10″ length 1½” patterned grosgrain ribbon;

Diy ribbon chapstick holder. These cute lip balm holders make great handmade gifts. This is the trickiest part because faux leather can vary so much. You only need a couple supplies and basic sewing skills.

Fold the ribbon in half, aligning the sides and folded top ends. Chapstick holder with matching tissue paper holder kleenex case with key ring great tutorial for the beginning project! Then fold up the bottom, using the lip balm as a guide.

For a boho touch, make the holder as a pendant to your crocheted necklace. Measure and cut about 9 inches of ribbon. Thread to match your ribbon;

This is a great quick sew that should take about 15 minutes. You may create some tricky knots to make the nylon hold your chapstick better and firmer. First, use the template to cut the faux leather.

Tuck the ends of the 1/4 ribbon inside the upper edge of the 1 1/2 piece of folded. Push out corners and press flat. Cut the ribbon to length.

When autocomplete results are available use up and down arrows to review and enter to select. Now you can always find it. When autocomplete results are available use up and down arrows to review and enter to select.

The chapstick holder will take up an extra 13/16 x 13/16 x 2 in your pocket, and weighs 0.7oz. Slide a key ring onto the 2 piece of ribbon which has been folded in half. This sets the fabric and gets it ready for the project.

Stitch along three sides of the chapstick holder using a ¼” seam allowance, leaving the bottom end unsewn. So choose something that speaks to you! Remember that fabric choice is the fun part!

And even better, is the fact that you get to use up all your scraps since the project takes such a small amount of fabric. Use a lighter to seal the ends of the ribbon to prevent fraying. I like to stick the fuzzy part to some transfer tape and then have it go on the mat transfer tape side down.

Before i begin any sewing project, especially when using cotton fabric i like to wash, dry and iron the fabric. I used a stiffer faux leather piece recycled from an unused handbag. Easy diy chapstick holder keychain.

Stitch bottom closed using a 1/8” seam. Explore • diy and crafts • diy projects. Flip the lip balm holder over.

Now put the ribbon through the swivel clip and fold over about 1/4 of the ribbon length. Sew up one long side, across the short side containing the ribbon and down the other long side. Stitch along one side of the folded ribbon as shown, using about a 1/8 seam allowance:

Supplies to make the ribbon chap stick holder. Instructions for making the ribbon chap stick holder. You only need two supplies and basic sewing skills.

Tie up a ribbon around the top of the holder. How to make a faux leather chapstick holder. Diy chapstick key chain holder.

Small scrap of fabric keychain ring chapstick click here for the instructions.

Chapstick Holder Keychain Chapstick holder, Chapstick